Apoaqua Sludge Dewatering Machine for Sales
Apoaqua Sludge Dewatering Machine for Sales
Apoaqua Sludge Dewatering Equipment for Sales
Apoaqua Sludge Dewatering Equipment for Sales
Apoaqua Sludge Dewatering Screw Press 202 Type
Apoaqua Sludge Dewatering Screw Press 202 Type
Apoaqua Sludge Dewatering Screw Press 303 Type
Apoaqua Sludge Dewatering Screw Press 303 Type

Sludge dewatering machine is a common sludge dewatering equipment, which uses the screw extrusion principle. Strong extrusion pressure is generated by changing the screw diameter and pitch. The sludge is dehydrated by reciprocating squeezing the moving ring between the fixed rings. The repeated movement of the mobile ring between the fixed rings can remove the sludge in the filter gap.

It can be seen that the movable ring and the fixed ring are important structures of the sludge dewatering screw press. The existing movable ring and fixed ring are both metal ring structures. After long-term use, the contact surface between the moving ring and the fixed ring will be worn or even damaged. At this time, the entire damaged moving ring needs to be replaced. In the long run, this situation will increase costs and affect the efficiency of the dehydrator.

For this purpose, we developed new types of moving and fixed rings.

Structure

  • The moving ring’s outer edge and inner side are provided with metal reinforcement layers. The function of the metal reinforcement layer is to reduce the wear of the moving ring.
  • A plurality of microprotrusions are fixed on the surface of the moving ring. The surface of the fixing ring corresponding to the micro-protrusions also has a metal reinforcement layer.
  • Micro-protrusions are welded to the surface of the moving ring. The micro protrusions are evenly distributed on both sides of the moving ring.
  • The metal reinforcement layer contains cobalt, tungsten, and a mixture of various metals.
  • The total thickness of the moving ring and the micro protrusions of the sludge dewatering machine is less than the distance between two adjacent fixed rings.
  • One end of the micro protrusion is a thread structure. The surface of the moving ring is provided with threaded holes, and the micro protrusions are connected with the threaded holes.
  • The inner surface of the retaining ring also has a metal reinforcement layer.
  • The micro-protrusions are hemispherical structures and the number is no more than 6.
  • The diameter of the micro-protrusion is 1/3 – 1/4 of the diameter of the movable ring.
  • The tip of the micro-protrusion is a rounded structure.

Advantages of metal reinforcement layer materials:

  • It has good high temperature and room temperature hardness.
  • Excellent strength.
  • High-temperature fatigue resistance.
  • Thermal shock resistance.
  • Good antioxidant properties.
  • Corrosion resistance (chromium content is about 22-33%).
  • Good self-lubricating properties.
  • Highly resistant to abrasive wear.

Beneficial Effects

  • The outer surface and the inner surface of the moving ring are provided with a metal reinforcement layer.
  • There are micro-protrusions on both side planes of the moving ring. The micro-protrusions can reduce the contact and collision between the outer surface of the moving ring and the outer surface of the fixed ring. This increases the service life of the moving ring. Reduce the number and frequency of replacement of mobile rings and reduce labor input. Improve the utilization efficiency of the entire sludge dewatering machine.